Hard Drive Glossary
Access
Access is the action of obtaining data from or writing data into a data storage device.
ANSI
American National Standards Institute.
ATA
Advanced Technology Attachment. ATA was originally defined as a standard for embedded fixed disk storage on IBM AT compatible PCs and is now the dominant storage interface.
Bit
Bit is an abbreviation for binary digit. A bit can only contain the value 1 or 0. The bit is the basic data unit for digital computers.
Buffer
The buffer is the storage area used to temporarily store data so that a difference in data transfer rates and/or data processing rates between sender and receiver can be compensated.
Byte
A byte consists of eight bits.
Cache
Like the buffer, the cache is DRAM (dynamic random access memory) on the hard drive used to store temporary data that has recently been accessed or data waiting to be written to the disk.
Capacity
Capacity is the amount of data that can be stored in a given storage device, usually expressed in bytes.
Channel
A channel (referring to that on a data cable) is a collection of electronic circuits used for data writing and reading processes to and from magnetic media.
Data
Data is an ordered collection of information.
Gigabyte (GB)
A unit of storage. 1 GB can mean either 1,000,000,000 bytes using the decimal system or 1,073,741,824 bytes using the binary system. Most hard drive manufacturers define 1GB as 1,000,000,000 bytes, while the operating system will treat 1GB as 1,073,741,824 bytes. This is why the operating system shows the hard drive’s capacity as different to the manufacturer’s claim.
Jumper
Jumpers are used to set a hard drive’s attributes, such as Master/Slave. A jumper is in essence a simple on/off switch and when placed over two pins it is the same as closing a circuit. The combination of one or several jumpers results in different settings.
Latency
Latency refers to the delay that occurs when requesting a specific response. Less latency is better.
Megabyte (MB)
A unit of storage. 1MB=1,000,000 bytes decimal or 1,048,576 bytes binary. Hard drive manufacturers usually apply the decimal system while the operation systems apply binary system of calculating storage capacity.
PATA (Parallel ATA), IDE/EIDE (Enhanced Integrated Drive Electronics)
ATA is the acronym for Advanced Technology Attachment, and it has become an industry standard hard drive interface for 15 years. ATA uses a 16-bit parallel connection to make the link between storage devices and motherboards, and is also called PATA to distinguish it from the newer SATA standard. In additional, ATA is also known as IDE or EIDE (Enhanced Integrated Drive Electronics). Currently the two most popular standards for ATA hard drives are the ATA-6 (which is also known as Ultra ATA 100 or Ultra DMA 100) and ATA 133. The maximum bandwidth for the former is 100MB/s, and 133 MB/s for the latter.
SATA (Serial ATA)
SATA is an interface standard for connecting hard drives to computer systems, and is based on serial signaling technology. The advantages over PATA include longer, thinner cables for more efficient airflow within a computer chassis, fewer pin conductors for reduced electromagnetic interference, and lower signal voltage to minimize noise margin. The bandwidth of SATA is also far improved over today’s PATA – the SATA 1.0 can reach a maximum of 1.5Gb/s (150MB/s), while the latest SATA 2.5 standard can support up to 3Gb/s (300MB/s). As a result of so many advantages, the SATA interface is gradually replacing PATA as the mainstream hard drive interface in the personal storage market.
SCSI (Small Computer System Interface)
SCSI is a standard interface for transferring data between devices and computers. Thanks to its outstanding ability to compartmentalize diverse operation, SCSI is very suitable for multitasking operating environments. Also, SCSI enhances critical performance in situations where more than one device is connected. Before serial signaling technology was applied into the SCSI field, all SCSI interface standards used parallel technology to transfer data.
RAID (Redundant Array of Independent/Inexpensive Disks)
RAID is a method of using multiple hard drives together for data storage. A RAID system with multiple hard drives appears as a single drive to the operating system. Depending on the RAID level, the benefits provided by RAID is one or more of the following: better throughput, fault-tolerance or capacity (or something else) when compared to single hard drive.
- RAID level 0 (or RAID 0) is known as striping, where data is striped across multiple hard drives. RAID 0 provides the most advanced throughput and capacity, but offers no fault-tolerance.
- RAID level 1 (RAID 1) is known as mirroring, which stores the exact same data within at least two hard drives, this method shows excellent fault-tolerance and reliability, but delivers less capacity efficiency.
- RAID level 0+1 and RAID 1+0 are both striping and mirroring, providing good fault-tolerance and throughput all at the same time.
There are other RAID levels available too, such as RAID level 5 and RAID level 6.
Read
Reading is the action of access a storage location and obtaining the stored data.
Write
Writing is the action of recording data on a storage device.
Coolest Company
Very coolest company, werecoverdata and all members work done smartly.I had been tried to fix hard drive since Few months ago after it damaged badly but could not fix it.One of the best friend suggested me to come here.He also assurance me that they can fix it well.At first I could not believe then.But my mistake broke when they got it fixed.Thank you.
Friendly working
The crew was kind and friendly during working on my data project. It contains a lot of data that needed to recover and they did everything whatever I needed. Definitely I recommend them.
Happiest memories
I am so much desperate after almost losing my data. It was full of my happiest memories in there. But after having the service of WeRecoverData I return back my life. Thank You a lot.
Glorious company
What a glorious company is WERECOVERDATA.They handle my problem perfectly and I had impressed when they fixed raid server which is crashed.Thank you.
Great service
A lot of thanks to all the staff members at WERECOVERDATA for giving me with great service from the time I fetched my crashed hard drive in for recuperation to recover 100% of my data with success.I recommend it.
Met all expectations!
I was losing sleep worried I might have lost the data on my hard drive after it suddenly stopped working. The entire process of working with werecoverdata was smooth and exceptional. Wonderful response, professional to say the least. I couldnt be happier. Thank you!
Unthinkable work
What a awesome work from werecoverdata.They fixed nicely my damage hard drive.It’s a really unthinkable work because I thought it could not be discerned.Thank you.
Well done
Well done werecoverdata.They restored all data after I forgot to delete important information from my hard drive.I want to recommend it for them who face any kinds of problem.
Great service
When raid server is crashed,then i felt i was going to mad. Then I went to WeRecoverData. Overall the service and communication was great. I got a nice success.Thank you
Wise decision
I think I am lucky to meet with you when I almost lost my raid server no one can say about the appropriate company exactly who are working on that.By google searching I got you that was my really wise decision to contact you. Thank you guys.
Strongly recommend
Any kind of work they handle with care. I think this company is better than from other companies. Because I heard that they solved a lot of problems for many people. I strongly recommend to all the people who faced data loss problem, especially with raid server.
Thank you for saving my life worth of memories!
I really appreciate everything you did for me!
Great experience
After a server crash, the Raid was totally failled. We did many things to fix it but could not. WeRecoverData just did it within few hours. They are fantastic and it was a great experience.
Best effort
A lot of thanks to werecoverdata.They are always giving best effort to solve any type of work.Already they solved my different kinds of problem.Really it is very helpful company.
Great Job
What a dynamic company! I have not heard any complaint about this company. They take any work with liability. pretty good reputation… they lived up to their name.
AWESOME
Wow nice job. I was so much upset when I saw my hard drive crashed. They helped me to recover data. Thank You
Well done
The company recovered my failed clicking hard drive, within 2 days i had my files back. Thank you!
Great job guys!
The service was professional, reasonably priced and the terms were better than any company i spoke to, it was definitely worth it.